|
Heres a '05 Chevy Colorado in the shop getting 5" of lift! We started with a completely stock truck, then added 2" in
the Torsion bars, and a 2" add-a-leaf in the rear! This picture shows the front leveled up even.
This is the side showing the leveled up truck! We then had it aligned, getting it ready for a 3" body lift!
In this picture we have removed the front-end to start the body lift steps. The front-end must be removed on this particular
application to access the Radiator and Condensor for modification!
Here we have done one side of the cab, and getting ready to finish the other side. Next we will have to do the Radiator
drop. This involves cutting out the stock sheetmetal behind the support where the Radiator sat stock. This needs to be cut
out so the Radiator can drop down and set in its new mounts!
This picture shows the cab completely done except putting the front end back on. Now its time to do the bed which is
quite a bit easier than the cab.
These next two pictures are the finished truck. With the 5" total lift, we had room to install Pro-comp 305/70-16 M/T
tires on 16x8 Eagle 1372 wheels with the Black Simu-lock rings!
page 2
|
